Special Drywall Anchors
PDM
| Availability: | |
|---|---|
| Quantity: | |
Features of Plastic Wall Anchors
Wall Anchors Self Drilling Drywall Title:
High Loading plastic anchor wall plug PA & POM & Nylon wall anchor china
Dry Wall Anchors:
Special "refers to the optimization of special engineering plastic materials, combining" PA "(polyamide, nylon) and" POM "(polyoxymethylene) to enhance wear resistance and chemical corrosion resistance, suitable for both home and commercial environments;
Material:PA & POM & Nylon& Zinc Alloy,etc.
Dia.:10mm,12mm,13mm,14mm,15mm, etc.
Screw Dia.: 3.8-4.2mm Hole Drill: 10-15mm
Length:28mm,29mm,30mm,33mm,40mm,42mm,etc.
We can provide the screws with anchors,and other special drywall anchors.
Materials and Design
PA POM composite material ensures high strength and low friction coefficient, reducing installation resistance;
The surface of Zinc Alloy Wall anchors is often treated with a coating (such as zinc plating) to enhance their rust prevention ability, making them suitable for dry indoor environments and avoiding use in humid areas (such as bathrooms).

| Modle | Dia.(mm) | Length(mm) | Drill Dia. | Hole Drill | Screw Dia. | Material |
| PDM5091 | 14 | 55 | 6 | -- | -- | PA |
| PDM5091 | 15 | 45 | 6 | 10-15 | 3.8-4.2 | PA |
| PDM5091 | 14 | 45 | 6 | 10-15 | 3.8-4.2 | PA |
| PDM5091 | 13 | 42 | 6 | 10-15 | 3.8-4.2 | PA/POM |
| PDM5091 | 13 | 40 | 6 | 10-15 | 3.8-4.2 | PA |
| PDM5091 | 15 | 28 | 6 | 10-15 | 3.8-4.2 | PA |
| PDM5091 | 14 | 29 | 6 | 10-15 | 3.8-4.2 | PA |
| PDM5091 | 12 | 34 | 6 | 10-15 | 3-3.5 | PA |
| PDM5091 | 15 | 33 | 6 | 10-15 | 3.5-4 | PA |
| PDM5091 | 10 | 33 | 6 | 10-15 | 3-3.5 | PA/POM |
| PDM5091 | 12 | 40 | Zemark Material Anchor can Drill into Drywall without Holes. | 3.8-4 | Zinc | |
| PDM5091 | 13 | 42 | 3.8-4 | Zinc | ||
| PDM5091 | 14 | 40 | 3.8-4 | Zinc | ||
| PDM5091 | 15 | 38 | 3.8-4 | Zinc | ||
| PDM5091 | 14 | 38 | 3.8-4 | Zinc | ||
| PDM5091 | 12 | 31 | 3.5-4 | Zinc | ||
| PDM5091 | 13 | 30 | 3.5-4 | Zinc | ||
| PDM5091 | 14 | 28 | 3.8-4.2 | Zinc | ||
| PDM5091 | 14 | 32 | 3.8-4.2 | Zinc | ||
| PDM5091 | 13 | 29 | 3.5-4 | Zinc | ||
| PDM5091 | 14 | 25 | 3.5-4 | Zinc | ||
| PDM5091 | 10 | 33 | 6 | 10-15 | 3-3.5 | PA/POM |
| PDM5091 | 12 | 25 | 6 | 10-15 | 3-3.5 | PA |
| PDM5091 | 13 | 17 | 6 | -- | -- | PA |
Core functions and applications
Suitable for fixing lightweight items such as curtain rods, small storage racks, or electrical devices; Multiple anchor bolts can improve stability when subjected to dispersed forces.
During installation, it is necessary to avoid internal wires or pipelines, and prioritize the use of wall studs to enhance support; If the wall is hard, small holes can be pre drilled to guide it, but excessive screwing should be avoided to prevent breakage.

Precautions
Only for use with hollow gypsum board, prohibited for use on brick walls or concrete (expansion bolts must be used instead); The screw must match the inner diameter of the anchor bolt (such as No.6), as being too thick or too thin can cause loosening or cracking.
Regularly check if the load exceeds the limit, and recommend using stainless steel alternatives in humid environments to extend its lifespan.
content is empty!
This guide, What Are The Different Types of Nylon Tip Set Screws And Their Applications? - PDM Industry, breaks down the distinctions among non-marring grub screw options. Our standout nylon tipped set screws adopt a unique flat half dog point design, different from standard soft-tip set screws; these blind, headless fasteners dampen vibration and reliably secure pulleys, collars, couplings and gears onto shafts, with the rigid yet soft nylon half dog point enabling easy removal without scratching mating surfaces. PDM Industries supplies these nylon tip set screws in durable 18-8 stainless steel across a wide range of inch and metric thread sizes and lengths, with downloadable specification PDFs for sizing reference, alongside alternative non-marring options including No-mar Tip Set Screw and brass tip grub screws, helping buyers select the right soft-tip fastener type for their unique shaft-locking applications.
Which nylon should you specify for plastic nylon concrete wall plugs, threaded inserts and tight-tolerance fasteners? This guide compares core performance of PA6, PA66 and PA12: budget-friendly PA6 offers good impact toughness for general wall plugs; PA66 delivers higher rigidity, heat resistance and creep resistance for loaded inserts and fasteners that need stable clamping force long-term; PA12 features the lowest moisture absorption and best dimensional stability, ideal for high tight-tolerance fastening parts in humid environments. Discover the key trade-offs to prevent dimension shift, loosening and early failure of your nylon fastening components.
In modern manufacturing, aerospace and automated robotics workshops, repeated assembly and fixture change‑over demand fastening hardware that trades away slow wrenches and threaded bolts. That is where ball lock pins quick release pins, also widely referenced as a quick release ball pin lock, become
PDM's custom screws and components, including non-standard screws, custom stainless steel screws, and thumb screws, have been recognized by a Spanish client in the pumps systems and solutions industry. The client visited PDM to secure multi-category cooperation, focusing on stainless steel Beverage mixer accessories and Stainless Steel Gas Manifold Fitting. The long-term partnership between the two parties is based on PDM's competitive costs, stable quality, fast delivery, and professional service. PDM looks forward to expanding cooperation with more customers from Spain and Europe.
Their simple circular cross-section delivers reliable static and dynamic sealing, making them indispensable for preventing fluid/gas leakage and maintaining system stability. This article systematically explains O-ring working principles, material selection, hardness matching, groove design, typical applications, and international standards—providing a professional reference for precision manufacturing and engineering design.
